Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Voltage converter, inverter, transformerDescription: BLOCK AVB 3,2/2/6 Transformer, isolation, 12VAC, 3.2VA89461+$51.599910+$48.6393100+$46.4399250+$46.1016500+$45.76321000+$45.38252500+$45.04425000+$44.8327 -
![]()
Category: AC-DCconverterDescription: BLOCK PVSB 400/24-40 Stabilized power supply, AC-DC, 24V, 40A41981+$4063.653010+$4026.710725+$4008.239650+$3989.7684100+$3971.2973150+$3952.8261250+$3934.3550500+$3915.8838 -
![]()
Category: transformerDescription: 230V Communication primary VC/VCM series single or double secondary windings, used for series or parallel connection of vacuum epoxy resin molding, compliant with UL94V-O low winding capacitance low radiation noise 100% electrical and insulation test additional fixing points to ensure board installation fastening (25 VA and 36 VA) selection guide - VA rating | Pin configuration (mm) | | | P1 | S1 | S2 | A 3.2VA | 20 | 10 | 5 | 25 5VA | 25 | 15 | 5 | 25 10VA | 25 | 15 | 27.5 16VA | 30 | 20 | 5 | 30 selection guide - VA rating | Fixed center (mm) | | | Pin configuration (mm) | | | | C1 | C2 | P1 | S1 | S2 | A 25VA | 72.5 | 43.5 | 30 | 20 | 5 | 32.5 36VA | 77.5 | 47.5 | 35 | 20 | 5 | 35 50VA | 82 | 37.5 | 35 | 15 | - | 35 Isolation | Primary to Secondary 5kV AC, Secondary to Secondary 250V AC --- | --- Protection Level | Level 2 Insulation | B Level (130 ° C) pin length x diameter | 5mm x 0.8mm maximum ambient temperature | 3.2VA+60 ° C, 5VA+50 ° C, 10 to 36VA+40 ° C # # # Note: UL506 transformers with 2 x 24V output in accordance with VDE 0550 standard should not be connected in series with secondary devices. ###Recognized ENEC, UL certification # # # Standard EN 61 558 IEC 61558 # # Closed laminated - VC, VCM series41701+$158.802410+$154.659750+$151.4836100+$150.3789200+$149.5504500+$148.44571000+$147.75522000+$147.0648 -
![]()
Category: transformerDescription: VB The PT series 230V AC 50 to 60Hz primary winding, single or double secondary winding, is used for series or parallel connection (for safety compliance reasons, transformers with 2 x 15 and 2 x 18V outputs, 0.35 to 3.2VA, and all transformers with 2 x 24V outputs should not have their secondary windings connected in series, as this means they will not comply with VDE 0550 certification). The VB series (0.35-3.2VA) has inherent short-circuit protection. The PT series (4.5-22VA) is protected by internal PTC equipment with a compact design vacuum epoxy resin molding, achieving UL94-V0 level dual load glass fiber reinforced polyamide wire spools with 100% electrical and insulation testing, high efficiency and low temperature rise, low capacitance between windings, and low radiation noise. Additional fixing holes are provided to ensure low noise between windings at 4.5V. Guidelines for Installing and Tightening the Upper Plate of VA and Higher Transformers (Double Secondary) - VA Rated value | Fixed center (mm) | | Pin configuration (mm) | | | | C1 | C2 | P1 | S1 | S2 | A | Pin size 0.35 | - | - | 15 | 5 | 5 | 15 | 0.6 Ø 0.5 | - | 15 | 5 | 5 | 15 | 0.6 Ø 1.0 | - | - | 20 | 10 | 20 | 0.8 Ø 1.5 | - | 20 | 10 | 5 | 20 | 5 | 20 | 5 | 0.8 Ø 2.3 | - | - | 20 | 10 | 5 | 20 | 0.8 Ø 3.2 | - | - | 20 | 10 | 25 | 0.8 Ø 4.5 | 35 | 28 | 25 | 15 | 5 | 25 | 0.8 Ø 7.5 | 40 | 32 | 25 | 15 | 5 | 27.5 | 0.8 Ø 13 | 47.5 | 37.5 | 30 | 20 | 5 | 30 | 0.8 Ø 22 | 52.5 | 40 | 30 | 10 | 32.5 | 0.8 Ø Isolation | | Primary to Secondary 5kV Secondary to Secondary 250V -------------------- | Protection Level | 2 Insulation: | VB Series PT Series | B Class (130 ° C) A Class (105 ° C) E Class (120 ° C) A Class (105 ° C) Fixed: Strengthen the mechanical fixation of 4.5 to 22VA transformers by using 4 self tapping screws (maximum size 4 x 9.5mm) and fixing holes at the corners of the box. || Maximum ambient temperature | 0.35 to 2.3VA+70 ° C, 3.2VA+50 ° C, 4.5 to 22VA+40 ° C | Selection guide (single secondary) - VA rating | Pin configuration (mm) |53121+$64.926710+$62.1038100+$61.5957250+$61.2005500+$60.57941000+$60.29712500+$59.90195000+$59.5632 -
![]()
Category: transformerDescription: VB The PT series 230V AC 50 to 60Hz primary winding, single or double secondary winding, is used for series or parallel connection (for safety compliance reasons, transformers with 2 x 15 and 2 x 18V outputs, 0.35 to 3.2VA, and all transformers with 2 x 24V outputs should not have their secondary windings connected in series, as this means they will not comply with VDE 0550 certification). The VB series (0.35-3.2VA) has inherent short-circuit protection. The PT series (4.5-22VA) is protected by internal PTC equipment with a compact design vacuum epoxy resin molding, achieving UL94-V0 level dual load glass fiber reinforced polyamide wire spools with 100% electrical and insulation testing, high efficiency and low temperature rise, low capacitance between windings, and low radiation noise. Additional fixing holes are provided to ensure low noise between windings at 4.5V. Guidelines for Installing and Tightening the Upper Plate of VA and Higher Transformers (Double Secondary) - VA Rated value | Fixed center (mm) | | Pin configuration (mm) | | | | C1 | C2 | P1 | S1 | S2 | A | Pin size 0.35 | - | - | 15 | 5 | 5 | 15 | 0.6 Ø 0.5 | - | 15 | 5 | 5 | 15 | 0.6 Ø 1.0 | - | - | 20 | 10 | 20 | 0.8 Ø 1.5 | - | 20 | 10 | 5 | 20 | 5 | 20 | 5 | 0.8 Ø 2.3 | - | - | 20 | 10 | 5 | 20 | 0.8 Ø 3.2 | - | - | 20 | 10 | 25 | 0.8 Ø 4.5 | 35 | 28 | 25 | 15 | 5 | 25 | 0.8 Ø 7.5 | 40 | 32 | 25 | 15 | 5 | 27.5 | 0.8 Ø 13 | 47.5 | 37.5 | 30 | 20 | 5 | 30 | 0.8 Ø 22 | 52.5 | 40 | 30 | 10 | 32.5 | 0.8 Ø Isolation | | Primary to Secondary 5kV Secondary to Secondary 250V -------------------- | Protection Level | 2 Insulation: | VB Series PT Series | B Class (130 ° C) A Class (105 ° C) E Class (120 ° C) A Class (105 ° C) Fixed: Strengthen the mechanical fixation of 4.5 to 22VA transformers by using 4 self tapping screws (maximum size 4 x 9.5mm) and fixing holes at the corners of the box. || Maximum ambient temperature | 0.35 to 2.3VA+70 ° C, 3.2VA+50 ° C, 4.5 to 22VA+40 ° C | Selection guide (single secondary) - VA rating | Pin configuration (mm) |39721+$86.380010+$82.6243100+$81.9483250+$81.4225500+$80.59621000+$80.22072500+$79.69495000+$79.2442 -
![]()
Category: transformerDescription: VB The PT series 230V AC 50 to 60Hz primary winding, single or double secondary winding, is used for series or parallel connection (for safety compliance reasons, transformers with 2 x 15 and 2 x 18V outputs, 0.35 to 3.2VA, and all transformers with 2 x 24V outputs should not have their secondary windings connected in series, as this means they will not comply with VDE 0550 certification). The VB series (0.35-3.2VA) has inherent short-circuit protection. The PT series (4.5-22VA) is protected by internal PTC equipment with a compact design vacuum epoxy resin molding, achieving UL94-V0 level dual load glass fiber reinforced polyamide wire spools with 100% electrical and insulation testing, high efficiency and low temperature rise, low capacitance between windings, and low radiation noise. Additional fixing holes are provided to ensure low noise between windings at 4.5V. Guidelines for Installing and Tightening the Upper Plate of VA and Higher Transformers (Double Secondary) - VA Rated value | Fixed center (mm) | | Pin configuration (mm) | | | | C1 | C2 | P1 | S1 | S2 | A | Pin size 0.35 | - | - | 15 | 5 | 5 | 15 | 0.6 Ø 0.5 | - | 15 | 5 | 5 | 15 | 0.6 Ø 1.0 | - | - | 20 | 10 | 20 | 0.8 Ø 1.5 | - | 20 | 10 | 5 | 20 | 5 | 20 | 5 | 0.8 Ø 2.3 | - | - | 20 | 10 | 5 | 20 | 0.8 Ø 3.2 | - | - | 20 | 10 | 25 | 0.8 Ø 4.5 | 35 | 28 | 25 | 15 | 5 | 25 | 0.8 Ø 7.5 | 40 | 32 | 25 | 15 | 5 | 27.5 | 0.8 Ø 13 | 47.5 | 37.5 | 30 | 20 | 5 | 30 | 0.8 Ø 22 | 52.5 | 40 | 30 | 10 | 32.5 | 0.8 Ø Isolation | | Primary to Secondary 5kV Secondary to Secondary 250V -------------------- | Protection Level | 2 Insulation: | VB Series PT Series | B Class (130 ° C) A Class (105 ° C) E Class (120 ° C) A Class (105 ° C) Fixed: Strengthen the mechanical fixation of 4.5 to 22VA transformers by using 4 self tapping screws (maximum size 4 x 9.5mm) and fixing holes at the corners of the box. || Maximum ambient temperature | 0.35 to 2.3VA+70 ° C, 3.2VA+50 ° C, 4.5 to 22VA+40 ° C | Selection guide (single secondary) - VA rating | Pin configuration (mm) |69371+$61.216810+$58.5552100+$58.0761250+$57.7035500+$57.11791000+$56.85182500+$56.47925000+$56.1598 -
![]()
Category: Classification of electronic componentsDescription: BLOCK PVAF 24/7Ah Power Supply Accessory, Battery Module, Block Power Compact & Power Vision Power Supplies, 7Ah19961+$1828.984310+$1812.357225+$1804.043650+$1795.7300100+$1787.4165150+$1779.1029250+$1770.7893500+$1762.4758 -
![]()
Category: Classification of electronic componentsDescription: Control Transformer, 5, 000 VA, 500Vi, 115/230VAC out5589 -
![]()
Category: Classification of electronic componentsDescription: Control Transformer, 2, 000 VA, 230Vi, 115/230VAC out75561+$2606.061710+$2582.370225+$2570.524550+$2558.6788100+$2546.8330150+$2534.9873250+$2523.1416500+$2511.2958 -
![]()
Category: Voltage converter, inverter, transformerDescription: BLOCK STEU160/23 Transformer, 160VA 230/400V 2X 115V77251+$664.905010+$641.575050+$638.6588100+$635.7425150+$631.0765250+$626.9938500+$622.91101000+$618.2450 -
![]()
Category: transformerDescription: 230V Communication primary VC/VCM series single or double secondary windings, used for series or parallel connection of vacuum epoxy resin molding, comply with UL94V-O low winding capacitance low radiation noise 100% electrical and insulation test additional fixing points, ensure board installation fastening (25 VA and 36 VA) note to comply with VDE 0550 standard, UL506 with output of 2 x 24V, all transformers should not be connected in series with secondary equipment. Recognized ENEC, UL certification standard EN 61 558 IEC 61558 Closed laminated - VC, VCM series99991+$48.265610+$45.4963100+$43.4391250+$43.1226500+$42.80611000+$42.45002500+$42.13355000+$41.9357 -
![]()
Category: Classification of electronic componentsDescription: BLOCK RK120/9 Toroidal Transformer, 43mm x 100mm, 120VA, 2 x 9V, 6.67A, Chassis7747 -
![]()
Category: Classification of electronic componentsDescription: BLOCK RK100/12 Toroidal Transformer, 43mm x 93mm, 100VA, 2 x 12V, 4.17A, Chassis5618 -
![]()
Category: Classification of electronic componentsDescription: BLOCK RK100/9 Toroidal Transformer, 43mm x 93mm, 100VA, 2 x 9V, 5.56A, Chassis9722 -
![]()
Category: Classification of electronic componentsDescription: BLOCK RK100/15 Toroidal Transformer, 43mm x 93mm, 100VA, 2 x 15V, 3.33A, Chassis9172 -
![]()
Category: Voltage converter, inverter, transformerDescription: BLOCK PT 7.5/2/15 Isolation Transformer, EI 48 x 16.8, 7.5 VA, 1 x 230V, 2 x 15V, 250 mA, PT Series8116 -
![]()
Category: AC-DCconverterDescription: BLOCK PP-0124-002-0 AC-DC PCB Mount Power Supply, Single Phase, Adjustable, Fixed, 1 Output, 85V, 264V, 4.162W, 24V6680 -
![]()
Category: Voltage converter, inverter, transformerDescription: BLOCK FLN 40/12 Transformer, isolation, 24VAC, 40VA6623 -
![]()
Category: transformerDescription: Block 2Output through-hole PCB transformer PT 30/2/9, 230V ac primary voltage, 9V ac secondary voltage, 30VA7291 -
![]()
Category: Voltage converter, inverter, transformerDescription: BLOCK FLN 30/18 Transformer, isolation, 36VAC, 30VA6084 -
![]()
Category: transformerDescription: Block 2Output through-hole PCB transformer PT 30/2/15, 230V ac primary voltage, 15V ac secondary voltage, 30VA4673 -
![]()
Category: Uninterruptible Power Supply (UPS)Description: BLOCK PC-1024-050-1 SINGLE PHASE DIN POWER SUPPLY/UPS CONTROLLER VOUT 24V @ 5A WITH POWER BOOST New1069 -
![]()
Category: power moduleDescription: 22 至 220W 线性，未调节 GLC 系列 230V 交流输入 24 V 直流（标称）输出安全隔离变压器，符合 VDE0551、EN60742 4kV 输入/输出闪光测试 手指可安全、轻松地接入螺钉接线端子 输出中具有双螺钉接线端子 输入和输出熔丝保护 LED 输出电压指示器 可（与相同类型）并联 输出电路中具有电解电容器 效率通常为 80% ### 注 引用的负载调节是典型值（未调整）。 ### 线性6787 -
![]()
Category: power moduleDescription: 22 至 220W 线性，未调节 GLC 系列 230V 交流输入 24 V 直流（标称）输出安全隔离变压器，符合 VDE0551、EN60742 4kV 输入/输出闪光测试 手指可安全、轻松地接入螺钉接线端子 输出中具有双螺钉接线端子 输入和输出熔丝保护 LED 输出电压指示器 可（与相同类型）并联 输出电路中具有电解电容器 效率通常为 80% ### 注 引用的负载调节是典型值（未调整）。 ### 线性6746 -
![]()
Category: transformerDescription: VB 和 PT 系列 230V 交流 50 至 60Hz 初级绕组 单或双次级绕组，用于串联或并联（出于安全符合性的原因，带 2 x 15 和 2 x 18V 输出的 0.35 至 3.2VA 变压器以及带 2 x 24V 输出的所有变压器不应将其次级绕组进行串联，因为这意味着它们不会符合 VDE 0550 认证） VB 系列 (0.35 - 3.2VA) 固有短路保护 PT 系列 (4.5 - 22VA) 由内部 PTC 设备提供保护 紧凑设计 真空环氧树脂模制，达到 UL94-V0 等级 双载面玻璃纤维增强聚酰胺线轴 100% 电气和绝缘试验 高效率和低温度上升 低绕组间电容 低辐射的噪音 额外固定孔，确保在 4.5VA 及更高变压器上板安装紧固 选择指南（双次级） --- VA 额定值 | 固定中心 (mm) | | 引脚配置 (mm) | | | | | C1 | C2 | P1 | S1 | S2 | A | 引脚尺寸 0.35 | - | - | 15 | 5 | 5 | 15 | 0.6 Ø 0.5 | - | - | 15 | 5 | 5 | 15 | 0.6 Ø 1.0 | - | - | 20 | 10 | 5 | 20 | 0.8 Ø 1.5 | - | - | 20 | 10 | 5 | 20 | 0.8 Ø 2.3 | - | - | 20 | 10 | 5 | 20 | 0.8 Ø 3.2 | - | - | 20 | 10 | 5 | 25 | 0.8 Ø 4.5 | 35 | 28 | 25 | 15 | 5 | 25 | 0.8 Ø 7.5 | 40 | 32 | 25 | 15 | 5 | 27.5 | 0.8 Ø 13 | 47.5 | 37.5 | 30 | 20 | 5 | 30 | 0.8 Ø 22 | 52.5 | 40 | 30 | 10 | 10 | 32.5 | 0.8 Ø 隔离 | | 初级至次级 5kV 次级至次级 250V ---|---|--- 防护等级 | | 2 级 绝缘： | VB 系列 PT 系列 | B 级 (130°C) A 级 (105°C) E 级 (120°C) A 级 (105°C) 固定：通过 4 颗自攻螺钉（最大使用 4 号 x 9.5mm）和使用箱角的固定孔，增强 4.5 至 22VA 变压器的机械固定。 | | 最高环境温度 | 0.35 至 2.3VA +70°C、3.2VA +50°C、4.5 至 22VA +40°C | 选择指南（单次级） --- VA 额定值 | 引脚配置 (mm) | | | | P1 | S1 | A | 引脚尺寸 0.35 | 15 | 5 | 15 | 0.6 Ø 0.5 | 15 | 5 | 15 | 0.6 Ø 1.0 | 20 | 10 | 20 | 0.6 Ø 1.2 | 20 | 10 | 20 | 0.8 Ø 1.5 | 20 | 10 | 20 | 0.8 Ø 2.0 | 20 | 10 | 20 | 0.8 Ø 2.8 | 20 | 10 | 20 | 0.8 Ø 3.2 | 20 | 10 | 25 | 0.8 Ø ### 认可 ENEC 10; UL 认证组件 ### 标准 EN 61558 ### 封闭式 - 叠片式 VB，PT 系列1383 -
![]()
Category: power moduleDescription: 120 to 960W 3 Phase PSR Series Short circuit proof Can be connected in parallel High efficiency from 83-88% Thermal overload cut-out Overload/Voltage protection DIN rail mountable. Switch on peak: | 30A ---|--- Mains failure hold up time: | 10ms/nominal voltage 230Vac Over-voltage protection: | Varistor in primary circuit Connections: | Cage clamp for 1.5mm2 to 2.5mm2 cable ### 标准 EN50081-1/-1 class B, 60601-1-2 class B (not PSR500/24-20 & PSR500/24-40), EN50082-2/-1, EN61000-4-2/-3/-4/-5/-6/-11. ### 开关模式 - Block1039
